Ywbl-wh Controller Temporm Temporm

פרטים נוספים

Item Type:

Temperature Controller

Material:

ABS and PCB

Model:

XK-W2001

Control Method:

Intelligent temperature control regulator

Temperature Range:

-50-110℃

Temperature Measurement Error:

0.1℃

Output Power:

1500W output

Capacity:

Maximum 10A

How to Use:

1.P0 set the startup temperature:

Press the SET button once to enter the internal menu, the default screen is P0, press the SET button again, and set the desired startup temperature through the up and down buttons.

2.P1 set stop temperature:

Press the set key once to enter the internal menu. The numbers are shown as P0. Press the up and down keys to switch to P1. Press the SET button again and use the UP and DOWN buttons to set the desired stop temperature.

3.P2 setting temperature correction:

enter the internal menu in the same way, press the up or down key to switch to P2, then press the setting key, and press the up or down key to set the desired calibration temperature.

4.P3 setting delay start:

in the same way, enter the internal menu, press the up or down key to switch to P3, then press the setting key, and press the up or down key to set the desired delay time (minutes). When setting the heating mode, if the set temperature value is reversed accidentally, the output indicator will not light up and the load will not work. If the above situation occurs after the setting is completed, you can check whether the limit temperature value is reversed.

Package List:

1 x Temperature Controller: